EARL'S® POWDER PUTTY

Multi-Purpose Powder Filler

Interior & Exterior

Just mix with water. No waste, no shrinking

Earl’s Powder Putty is a low cost multi-purpose filler for interior or exterior use.

 

Earl’s Powder Putty is the perfect filler for interior or exterior surfaces such as wood, plasterboard, cement sheeting, concrete, metal etc. Earl’s Powder Putty dries to a hard wearing finish and can be cut, carved, sanded or sawn. Ideal for repairs to timber, woodwork, walls, architectural or hobby moulding. Use as a quick patch to distressed floorboards before laying carpet.

 

Earl's Powder Putty is proudly 100% Australian made and 100% Australian owned.

FEATURES & BENEFITS

APPLICATION

FAQS

VIDEOS

Earl’s Powder Putty features

 

Perfect for timber, masonry & metal

Earl’s Powder Putty is the perfect filler for interior or exterior surfaces such as wood, plasterboard, cement sheeting, concrete and metal.

 

Ideal for so many jobs

Use on timber, woodwork, walls and architectural or hobby moulding, windows, flooring, decking etc

 

Indefinite shelf life

Earl’s Powder Putty has an indefinite shelf life.

 

Cut, carve, sand or saw it

Earl’s Powder Putty dries to a hardwearing  finish and can be cut, carved, sanded or sawn.

 

 

What is required

With Earl’s Powder Putty, you only need to mix enough for your immediate needs, so there is no waste.

 

Use it for interior or exterior

Earl’s Powder Putty is water resistant, weather resistant when coated but NOT waterproof. If using in an exterior situation ensure base material is stable.

 

Earl’s Powder Putty is not a  flexible compound and is unsuitable as a filler where there may be structural movement. It is advisable to coat after drying.

Easy to apply

 

Prepare base material. Restore rotted wood with Earl’s Wood Hardener and remove loose mortar and any contaminants such as oil, flaking paint, dirt, dust or sealant. Mix to required consistency and apply with a putty knife.

 

Slightly over ll and leave for 30 minutes before scraping o  to level or mould to required shape. For a smooth finish, wipe with a damp sponge and wait 2-3 hours to sand. Apply a primer before painting. Note that Earl’s Powder Putty does not absorb stain or colour as readily as wood, so a few coats may be required. For a thicker putty use less water. Do not apply too much water as it will break down and crack.

 

For further instructions, please refer to the product label.

 

 What to use Earl’s Powder Putty for :

Patching

Masonry Fittings

Rotted Timber

Timber Imperfections

Frequently Asked Questions

 

Question: Can you change the colour of Earl's Powder Putty?

Answer: Yes, simply add oxides before mixing with water.

 

Question: Can I use Earl's Powder Putty Outdoors?

Answer: Yes, make sure the filler is sealed though or it will be diluted and wash out.

Bringing you only quality brands & products for 25 years

For more information call us on 1800 354 811 or email info@timbermate.com.au

© Copyright 2018 Timbermate Group. All Right Reserved